Reveal Sound Spire V1.0.18 Final-R2R [ATOM]: What You Need to Know Before You Download and Install This Powerful Synthesizer Plugin
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] Downloadl: How to Create Amazing Sounds with This Powerful Synthesizer Plugin
If you are looking for a versatile and high-quality synthesizer plugin that can produce a wide range of sounds, from classic analog to modern digital, you should check out Reveal Sound Spire V1.0.18 Final-R2R [ATOM]. This plugin is one of the most popular and acclaimed synthesizers on the market, and for good reasons.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] Downloadl
In this article, we will show you what Reveal Sound Spire V1.0.18 Final-R2R [ATOM] can do, how to download and install it, and how to use it to create amazing sounds for your music production.
What is Reveal Sound Spire V1.0.18 Final-R2R [ATOM]?
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] is a software synthesizer plugin that combines the best of both analog and digital worlds. It is designed to deliver powerful, rich, and expressive sounds that can fit any genre and style of music.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has many features that make it stand out from other synthesizers, such as:
Four multimode oscillators that can generate various waveforms, including classic analog, noise, FM, AM, RM, and wavetable.
Two multimode filters that can emulate different types of filters, such as low-pass, high-pass, band-pass, notch, comb, acid, and more.
Four envelope generators and four LFOs that can modulate any parameter of the plugin with a flexible modulation matrix.
An arpeggiator and two step sequencers that can create complex rhythmic patterns and melodies.
Nine high-quality effects that can enhance your sounds with distortion, phasing, vowel, chorus, flanging, delay, reverb, EQ, punch, and multiband compression.
Over 1000 factory presets that cover a wide range of genres and styles, such as EDM, trance, house, techno, dubstep, hip-hop, pop, rock, ambient, cinematic, and more.
A user-friendly and intuitive interface that allows you to tweak and customize your sounds with ease.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] is compatible with both Windows and Mac operating systems and can run as a standalone application or as a plugin in your digital audio workstation (DAW) of choice. It supports VST2, VST3, AU, and AAX formats.
How to Download and Install Reveal Sound Spire V1.0.18 Final-R2R [ATOM]?
If you want to download and install Reveal Sound Spire V1.0.18 Final-R2R [ATOM], you need to follow these steps:
Go to the official website of Reveal Sound at https://www.reveal-sound.com/ and click on the "Buy Now" button on the top right corner of the page.
Select the option "Spire" from the drop-down menu and click on the "Add to Cart" button.
Review your order and click on the "Checkout" button.
Enter your personal and payment information and complete the purchase process.
You will receive an email confirmation with your license key and a download link for Reveal Sound Spire V1.0.18 Final-R2R [ATOM].
Click on the download link and save the file to your computer.
Extract the file using a program like WinRAR or 7-Zip and run the installer.
Follow the instructions on the screen and enter your license key when prompted.
Select the plugin formats and locations that you want to install and complete the installation process.
You can now launch Reveal Sound Spire V1.0.18 Final-R2R [ATOM] as a standalone application or as a plugin in your DAW.
How to Use Reveal Sound Spire V1.0.18 Final-R2R [ATOM]?
To use Reveal Sound Spire V1.0.18 Final-R2R [ATOM], you need to have a MIDI keyboard or controller connected to your computer or use your computer keyboard as a virtual keyboard. You can also use your mouse to play notes on the plugin's keyboard display.
You can use Reveal Sound Spire V1.0.18 Final-R2R [ATOM] as a standalone application or as a plugin in your DAW. To use it as a standalone application, simply launch it from your start menu or desktop shortcut. To use it as a plugin in your DAW, you need to add it as an instrument track or insert it on an existing track.
In this tutorial, we will show you how to use Reveal Sound Spire V1.0.18 Final-R2R [ATOM] as a plugin in FL Studio 20, but you can apply the same principles to any other DAW that supports VST2, VST3, AU, or AAX formats.
The Interface
The interface of Reveal Sound Spire V1. 0.18 Final-R2R [ATOM] is divided into several sections, each with its own controls and functions. Here is a brief overview of the main sections of the interface:
The top bar: This section contains the global settings and options of the plugin, such as the preset browser, the menu, the undo and redo buttons, the polyphony mode, the unison mode, the master volume, and the CPU usage indicator.
The keyboard display: This section shows the notes that are being played on the plugin's keyboard or on your MIDI keyboard or controller. You can also use your mouse to play notes on this section.
The oscillator section: This section contains the four multimode oscillators that generate the sound of the plugin. You can select different waveforms, adjust the pitch, detune, phase, mix, and pan of each oscillator, and enable or disable them.
The filter section: This section contains the two multimode filters that shape the sound of the plugin. You can select different filter types, adjust the cutoff, resonance, drive, keytrack, and mix of each filter, and enable or disable them.
The modulation section: This section contains the four envelope generators and four LFOs that modulate any parameter of the plugin. You can adjust the attack, decay, sustain, release, amount, rate, shape, sync, and phase of each envelope and LFO, and assign them to any parameter with a simple drag-and-drop.
The arpeggiator and sequencer section: This section contains the arpeggiator and two step sequencers that create complex rhythmic patterns and melodies. You can adjust the mode, rate, gate, swing, octave, step length, velocity, slide, and tie of each arpeggiator and sequencer, and enable or disable them.
The effect section: This section contains the nine high-quality effects that enhance your sound with distortion, phasing, vowel, chorus, flanging, delay, reverb, EQ, punch, and multiband compression. You can adjust the parameters of each effect, such as depth, speed, feedback, mix, time, size, gain, frequency, ratio, threshold, and more.
You can also access some hidden features by right-clicking on some controls or sections of the interface. For example:
You can right-click on any knob or slider to enter a precise value or to reset it to its default value.
You can right-click on any oscillator waveform to access a menu with more options for wavetable mode or noise mode.
You can right-click on any filter type to access a menu with more options for filter routing or filter feedback.
You can right-click on any modulation source or destination to access a menu with more options for modulation range or modulation curve.
You can right-click on any effect type to access a menu with more options for effect order or effect bypass.
The Oscillators
The oscillators are the heart of Reveal Sound Spire V1.0.18 Final-R2R [ATOM]. They generate the sound of the plugin by producing different waveforms that can be mixed and modulated in various ways.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has four multimode oscillators that can operate in four different modes: classic mode (CL), noise mode (NO), FM mode (FM), and wavetable mode (WT). Each oscillator has its own set of controls and functions depending on the mode selected.
Here is a brief description of each oscillator mode:
Classic mode (CL): This mode emulates the sound of classic analog synthesizers by generating basic waveforms such as sawtooth (SAW), pulse (PUL), triangle (TRI), sine (SIN), hard sync (HS), additive (ADD), vowel (VOW), and supersaw (SSAW). You can adjust the width (WID) of each waveform to change its shape and timbre. You can also use the sync (SYN) button to synchronize one oscillator to another for more complex sounds.
Noise mode (NO): This mode generates noise samples that can add texture and character to your sounds. You can choose from different types of noise samples such as white noise (WHI), pink noise (PIN), brown noise (BRO), crackle noise (CRA), vinyl noise (VIN), tape noise (TAP), wind noise (WIN), rain noise (RAI), ocean noise (OCE), fire noise (FIR), crowd noise (CRO), applause noise (APP), helicopter noise (HEL), gun noise (GUN), explosion noise (EXP), and more. You can adjust the color (COL) of each noise sample to change its frequency spectrum and brightness. You can also use the tone (TON) knob to filter the noise sample with a low-pass or high-pass filter.
FM mode (FM): This mode uses frequency modulation (FM) synthesis to create complex and harmonic sounds. You can choose from different types of FM algorithms that determine how the oscillators modulate each other. You can adjust the ratio (RAT) of each oscillator to change its frequency relative to the base frequency. You can also adjust the modulation index (IND) of each oscillator to change the amount of modulation applied.
Wavetable mode (WT): This mode uses wavetable synthesis to create dynamic and evolving sounds. You can choose from different types of wavetables that contain multiple waveforms that can be morphed between. You can adjust the position (POS) of each oscillator to change the waveform that is played. You can also adjust the warp (WRP) of each oscillator to change the shape and timbre of the waveform.
You can mix and pan the four oscillators using the mix (MIX) and pan (PAN) knobs on the bottom of the oscillator section. You can also mute (M) or solo (S) each oscillator to hear it individually or in isolation.
The Filters
The filters are the next stage in the signal path of Reveal Sound Spire V1.0.18 Final-R2R [ATOM]. They shape the sound of the plugin by removing or boosting certain frequencies from the sound spectrum.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has two multimode filters that can operate in parallel or serial mode. Each filter has its own set of controls and functions depending on the filter type selected.
Here is a brief description of each filter type:
Low-pass filter (LP): This filter removes high frequencies from the sound and lets low frequencies pass through. You can choose from different types of low-pass filters, such as 6 dB/octave, 12 dB/octave, 18 dB/octave, 24 dB/octave, acid, scream, and more.
High-pass filter (HP): This filter removes low frequencies from the sound and lets high frequencies pass through. You can choose from different types of high-pass filters, such as 6 dB/octave, 12 dB/octave, 18 dB/octave, 24 dB/octave, and more.
Band-pass filter (BP): This filter removes both low and high frequencies from the sound and lets a narrow band of frequencies pass through. You can choose from different types of band-pass filters, such as 6 dB/octave, 12 dB/octave, 18 dB/octave, 24 dB/octave, peak, notch, and more.
Notch filter (NO): This filter removes a narrow band of frequencies from the sound and lets both low and high frequencies pass through. You can choose from different types of notch filters, such as 6 dB/octave, 12 dB/octave, 18 dB/octave, 24 dB/octave, peak, band-pass, and more.
Comb filter (CO): This filter creates a comb-like pattern in the frequency spectrum by adding or subtracting delayed copies of the sound. You can choose from different types of comb filters, such as positive feedback, negative feedback, flanger, phaser, and more.
You can adjust the cutoff frequency (CUT) of each filter to change the point where the filtering occurs. You can also adjust the resonance (RES) of each filter to boost or attenuate the frequencies around the cutoff point. You can also adjust the drive (DRV) of each filter to add distortion or saturation to the sound.
You can also use the keytrack (KTR) button to make the cutoff frequency follow the pitch of the notes played on the keyboard. You can also use the link (LNK) button to link the cutoff frequencies of the two filters together. You can also use the filter routing (FRT) button to switch between parallel and serial modes for the filters.
The Modulation
The modulation is the process of changing or controlling one or more parameters of the plugin with another parameter. For example, you can modulate the pitch of an oscillator with an LFO to create vibrato, or modulate the cutoff frequency of a filter with an envelope to create a pluck sound.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has four envelope generators and four LFOs that can modulate any parameter of the plugin with a flexible modulation matrix. Each envelope and LFO has its own set of controls and functions depending on the type selected.
Here is a brief description of each envelope and LFO type:
Envelope generator (ENV): This is a device that generates a signal that changes over time according to four stages: attack, decay, sustain, and release. You can adjust the time and level of each stage to shape the envelope. You can choose from different types of envelopes, such as ADSR, ADR, AD, AR, and more.
LFO (LFO): This is a device that generates a periodic signal that oscillates between two values at a certain rate. You can adjust the rate, shape, sync, and phase of the LFO to change its behavior. You can choose from different shapes of LFOs, such as sine, triangle, sawtooth, square, random, and more.
You can assign any envelope or LFO to any parameter of the plugin with a simple drag-and-drop. You can also adjust the amount of modulation applied with a slider. You can also use the modulation matrix (MMX) button to access a menu with more options for modulation sources, destinations, ranges, curves, and more.
The Effects
The effects are the final stage in the signal path of Reveal Sound Spire V1.0.18 Final-R2R [ATOM]. They add extra processing and enhancement to your sound with various types of effects.
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has nine high-quality effects that can be applied in any order you want. Each effect has its own set of controls and functions depending on the type selected.
Here is a brief description of each effect type:
Shaper (SHP): This effect adds distortion or saturation to your sound with different types of algorithms. You can adjust the drive, mix, bias, and feedback of the shaper to change its character.
Phaser (PHS): This effect creates a sweeping effect by shifting the phase of your sound with different stages of filters. You can adjust the depth, speed, feedback, mix, center frequency, and spread of the phaser to change its sound.
Vowel (VOW): This effect creates a vocal-like effect by filtering your sound with different vowel shapes. You can adjust the vowel A, vowel B, mix, mod source, mod amount, and formant shift of the vowel to change its sound.
Chorus (CHR): This effect creates a thickening effect by adding slightly detuned copies of your sound with different delays. You can adjust the depth, speed, feedback, mix, width, and phase of the chorus to change its sound.
Flanger (FLN): This effect creates a sweeping effect by adding slightly delayed copies of your sound with varying delays. You can adjust the depth, speed , feedback, mix, width, and phase of the flanger to change its sound.
Delay (DLY): This effect creates an echo effect by adding delayed copies of your sound with different times and feedbacks. You can adjust the left time, right time, feedback, mix, width, damping, ping-pong, and sync of the delay to change its sound.
Reverb (RVB): This effect creates a spatial effect by simulating the sound of different acoustic environments. You can adjust the size, time, mix, width, damping, pre-delay, and color of the reverb to change its sound.
EQ (EQ): This effect adjusts the frequency balance of your sound with different bands of filters. You can adjust the low gain, low frequency, low Q, mid gain, mid frequency, mid Q, high gain, high frequency, and high Q of the EQ to change its sound.
Punch (PNC): This effect adds punch and clarity to your sound with a transient shaper and a saturator. You can adjust the attack, sustain, drive, and mix of the punch to change its sound.
Multiband compressor (MBC): This effect compresses your sound with different bands of compressors. You can adjust the low threshold, low ratio, low gain, mid threshold, mid ratio, mid gain, high threshold, high ratio, high gain, and mix of the multiband compressor to change its sound.
You can also use the effect order (EFO) button to change the order of the effects in the signal chain. You can also use the effect bypass (EFB) button to bypass all the effects at once.
The Presets
The presets are ready-made sounds that you can use as they are or as a starting point for your own sounds. Reveal Sound Spire V1.0.18 Final-R2R [ATOM] has over 1000 factory presets that cover a wide range of genres and styles.
You can access the presets by clicking on the preset browser (PRB) button on the top bar of the interface. You can browse through the presets by category or by author. You can also search for presets by name or by keyword. You can also use the arrows or the mouse wheel to scroll through the presets.
You can load a preset by clicking on it or by double-clicking on it. You can also use the keyboard shortcuts to load a preset: up arrow for previous preset, down arrow for next preset, left arrow for previous bank, right arrow for next bank.
You can also save your own presets by clicking on the save (SAV) button on the top bar of the interface. You can name your preset and choose a category and an author for it. You can also add a comment or a description for your preset. You can also overwrite an existing preset by clicking on the overwrite (OWR) button.
You can also share your presets with other users by exporting them as .sbf files or by importing them from .sbf files. You can use the export (EXP) button or the import (IMP) button on the top bar of the interface to do so.
Tips and Tricks for Reveal Sound Spire V1.0.18 Final-R2R [ATOM]
Reveal Sound Spire V1.0.18 Final-R2R [ATOM] is a very powerful and versatile synthesizer plugin that can create amazing sounds for your music production. However, there are some tips and tricks that can help you get the most out of it and unleash its full potential.
Here are some tips and tricks for Reveal Sound Spire V1.0.18 Final-R2R [ATOM] that you should know:
How to Create Your Own Presets
One of the best ways to learn how to use Reveal Sound Spire V1.0.18 Final-R2R [ATOM] is to create your own presets from scratch. This way, you can explore the different features and functions of the plugin and customize your sounds to your liking.
To create your own presets, you can follow these steps:
Start with an initialized preset by clicking on the init (INI) button on the top bar of the interface. This will reset all the parameters to their default values.
Select the oscillator mode, waveform, pitch, detune, phase, mix, and pan for each oscillator. You can also use the sync button t